**Vertical Feed Mixer Knife and TMR Mixer Blade Replacement Guide**
Proper processing and mixing of round bale forage is crucial for optimal feed efficiency and animal performance. Vertical feed mixers, featuring rotating augers and knives, are essential machines in this process. However, ensuring the blades remain sharp and efficient is vital for consistent performance.
**Recommended Procedure for Processing Round Bales**
The following steps provide a general guideline for processing round bales in vertical feed mixers:
1. **Slow Auger Speed for Adding Bales:** Start with a slow auger speed (15-20 RPM) to prevent stalling while initially cutting the bale. Keep restrictor blades retracted.
2. **Add Bale Gradually:** Carefully add the bale between the auger and the sidewall of the mixer. Place the bale in the rear for single auger mixers and between the augers for twin auger models.
3. **Incorporate Wet Ingredients Quickly:** As soon as the bale is partially disassembled, rapidly add moist ingredients like haylage, high moisture grain, or byproducts to carry the forage down the mixer wall and enhance cutting efficiency.
4. **Increase Auger Speed and Engage Restrictor Blades:** Once the bale is moving with other ingredients, increase the auger speed to 41 RPM. Monitor the mix and engage restrictor blades if necessary for more aggressive particle size reduction.
**Multiple Bale Procedure for TMR Mixers**
For multiple bales, follow the same steps as for a single bale, but add additional bales as soon as the previous one is partially disassembled.
**Importance of Knife and Blade Maintenance**
Sharp knives and blades are essential for efficient cutting and mixing. Dull blades can lead to increased power consumption, reduced forage quality, and reduced animal performance. Regularly inspecting and replacing blades as needed is crucial for optimal mixer operation.
**Contact FMK for a Quotation or Distribution**
FMK is an official distributor for mixer knives and spare parts. We offer competitive pricing, excellent service, and a wide range of options to meet your specific requirements. Contact us today for a quotation or to become a distributor.
For more information, visit www.leo-ag.com
Disclaimer: This article was written by AI and information within may be incorrect. Always consult a FMK professional for specific advice. If any trademarks have been used, the do not not manufacture, distribute or endorse these parts.
If these trademarks have been used in this AI article they do not belong to FMK and the represented company does not manufacture, distribute or endorse these parts.
Supreme™ is a trademark of Supreme International Ltd., which does not manufacture, distribute or endorse these parts.
Penta™ is a trademark of Penta TMR, Inc., which does not manufacture, distribute or endorse these parts.
Arts-Way™ is a trademark of Art’s-Way Mfg Co. Inc., which does not manufacture, distribute or endorse these parts.
Diamond™ is a trademark of Diamond Implements, which does not manufacture, distribute or endorse these parts.
Haybuster® is a registered trademark of DuraTech Industries International, Inc., which does not manufacture, distribute or endorse these parts.
MaxiMixer™ is a trademark of Sioux Automation Center, Inc., which does not manufacture, distribute or endorse these parts.
Meyer™ is a trademark of Meyer Manufacturing Corporation, which does not manufacture, distribute or endorse these parts.
Valmetal® is a registered trademark of Valmetal Inc., which does not manufacture, distribute or endorse these parts.
Peecon® is a registered trademark of Peeters Landbouwmachines B.V., which does not manufacture, distribute or endorse these parts.
JAY-LOR® is a registered trademark of JAY-LOR International Inc., which does not manufacture, distribute or endorse these parts.
Kuhn® is a registered trademark of Kuhn S.A., which does not manufacture, distribute or endorse these parts.
Kuhn Knight® is a registered trademark of Kuhn S.A., which does not manufacture, distribute or endorse these parts.
Patz® is a registered trademark of Patz Corporation, which does not manufacture, distribute or endorse these parts.”